Appliance Installation in Riverview
1000+ five-star reviews
A new dishwasher or oven only performs as well as the plumbing behind it, so every machine is connected to standard with fresh fittings, proper isolation and a fixed price agreed before anything is touched.
- $0 Call Out Fee
- Lifetime Labour Warranty
- Licensed & Insured
- Lic #275278C
- Licensed & Insured
- $0 Call Out Fee
- Lifetime Labour Warranty
- On-Site Fast, 24/7
- 1000+ five-star reviews
- Real Humans Answer, Day or Night
- Lic #275278C
- Licensed & Insured
- $0 Call Out Fee
- Lifetime Labour Warranty
- On-Site Fast, 24/7
- 1000+ five-star reviews
- Real Humans Answer, Day or Night
- Lic #275278CNSW plumbing licence, fully insured, water and gas
- $0 Call Out FeeIt costs nothing to get us to your door
- Lifetime Labour WarrantyIf it's not right, we come back. No questions. No cost.
- 1000+ five-star reviewsSydney homeowners have rated us five stars over a thousand times
A real person answers, day or night
New machines, old kitchens, connections done properly
A wall oven in a double-brick kitchen, a coffee machine at the corner cafe: the van carries the parts and finishes connections in one booked visit, with fresh hose sets, reachable shut-offs and tested joints, priced in writing first. That promise sits at the centre of everything on the home page, as Riverview locals know.
Kitchens plumbed for another era
- Kitchens plumbed for another era Plenty of Federation and post-war homes here still have a single cold tap under the sink and no isolation valves at all, so a new dishwasher or filtered tap usually means new shut-offs, new hoses and sometimes a fresh tee off a supply line that has quietly served the house for generations.
- The strip at 59 Tambourine Bay Road The cafe and the butcher at the local shops run commercial gear, and food businesses need appliances hooked up with compliant backflow protection and waste fittings that stand up to a council inspection, which is backflow testing territory as much as it is a connection job.
- Cabinetry and benchtops stay protected Connections are made from inside the cupboard or behind the panel where possible, so a stone benchtop never gets lifted and a 1950s cabinet never gets cut for a fitting that should have gone in from below.
What gets installed
Appliance installation covers every water- and gas-connected machine in the house, plus the commercial fittings at the corner shops. Each connection is made new rather than reused, because the fault behind most appliance failures is the fitting that came before it.
Dishwasher installs
A dishwasher is connected with a fresh hose set, a dedicated isolation valve and a correctly graded waste line, so the new machine drains properly from its very first cycle instead of straining the fittings the previous owner left behind.
Laundry machines
Laundry connections in the interwar and 1950s brick homes often mean a tap set in a cramped passage, so a washing machine or dryer gets fresh hoses, a proper standpipe and a shut-off that can be reached when something leaks.
Ovens and cooktops
Gas cooktops and wall ovens are carefully fitted, tested and certified by a licensed gas fitter, with the bayonet or hard-plumbed connection checked, the isolation point confirmed, and every joint leak-tested before the flame is lit for the first time.
Fridges and filtered taps
Fridge water lines, boiling and chilled taps and coffee machines all need a dedicated take-off with its own shut-off, plumbed neatly behind cabinetry so a cartridge or filter can be swapped later without pulling the kitchen apart to reach it.
Getting the van to your door
- Term-time traffic is planned around, not fought College traffic on Tambourine Bay Road defines the afternoon peak through term, so installs are booked into the windows when the street is actually workable and the driveway is clear.
- Long, sloping driveways are normal here Blocks stepping down toward the water often mean carrying gear further than most suburbs, and no gas bottles, hose reels or boxes get trundled up the hill twice because the van was stocked thin.
- Buses 253 and 254, not a train line With no rail of its own, the suburb runs on bus and car, so arrival windows are honest and confirmed by a plumber who is genuinely nearby rather than commuting across the city.
When a new connection goes wrong
A weep under the bench
A weeping dishwasher hose or a washing machine valve that drips after every cycle usually traces to a perished washer or an overtightened fitting, and replacing the hose set and shut-off properly ends the slow damage happening under the bench.
Water backing up the standpipe
A machine connected to an old standpipe can push water back up the waste, because laundry lines in these older homes run long before they reach the boundary, and the drainage side gets checked and regraded where the fall has flattened.
Why proper connections matter
- Water damage is silent at first A hose failing behind a closed cupboard door can weep for weeks before the flooring shows it, and the repair bill then covers joinery and floorboards rather than a minor fitting.
- Gas work is never a DIY job An oven or cooktop connection carries real consequences if it is wrong, and only a licensed gas fitter who leak-tests and certifies every joint should touch it.
- The machine lasts as long as its plumbing A quality appliance on a clean, correctly graded, properly isolated connection simply runs better and longer, and the warranty stays intact because the installation was done to standard.
How it works
How an installation runs, step by step
- 01
Call and tell us
Ring (02) 9072 0504 and describe what's happening, and a licensed plumber, not an answering machine, will tell you what it likely means, what to stop using, and when we can realistically be there.
- 02
Quote before work
Your plumber inspects the job properly, runs whatever diagnosis it genuinely needs, and hands you a single fixed written price covering the complete fix, with a $0 call out fee and nothing added afterwards.
- 03
Connections and testing
The connections happen next: fresh braided hoses, isolation valves and drainage fittings go in, the appliance is levelled and secured, and every water, waste and gas joint is pressure tested while the surrounding cabinetry stays protected throughout.
- 04
Backed for life
Everything we complete is covered by our Lifetime Labour Warranty, the promise that outlasts the job itself: if it's not right, we come back. No questions. No cost.
Why choose Your Plumber Riverview
Fixed prices, kept
Every job is priced upfront in plain writing before any work starts, the invoice always matches that number, and weekend or late-evening timing changes nothing, because overtime rates simply don't exist here.
Licensed and insured
Your Plumber Riverview works under licence #275278C with full insurance behind every job, and the compliance certificates that protect your home's paperwork trail arrive with the invoice, without you ever needing to ask for them.
Lifetime Labour Warranty
Workmanship here is guaranteed for life under our Lifetime Labour Warranty rather than for a warranty card's fine-print window, which says more about how the work is done in the first place than any advertisement could.
Genuinely local response
We work these streets constantly rather than commuting in from across Sydney, so the van reaching you has usually just left a job nearby, stocked for the faults the local houses actually develop.
That local stock is what makes a one-visit install realistic, and it is the same thinking behind the broader plumbing work covered across the house.
Where we work
Where else the van goes
The van runs the whole riverside pocket, with appliance installs booked regularly through Lane Cove, Longueville, Linley Point, Hunters Hill and Lane Cove West, all on the same fixed-price, stocked-van, lifetime-backed terms, wherever the job sits.
Good questions, straight answers
Six questions locals ask about new appliances
Do you take the old appliance away when you install the new one?
Yes, the old machine is disconnected, removed and taken away for recycling, and the new one is connected on fresh hoses and fittings rather than being hung off the worn parts the previous appliance used.
Do you install appliances the customer has bought elsewhere?
Absolutely, appliances bought from any retailer are installed to standard, with the supply hoses, isolation valves and waste connections brought up to scratch as part of one fixed written price agreed before the work begins.
Can a fridge with a water dispenser or ice maker be plumbed in?
Yes, a dedicated water line with its shut-off is run to the fridge, joined with quality fittings rather than a saddle valve, and the connection is leak-tested before the fridge is pushed back into its alcove.
How long does a standard appliance installation take?
Most single-connection installs are finished within one booked visit, with the timing confirmed when the fixed price is quoted, and any older-kitchen complications such as failed shut-offs are picked up and priced at that point.
Do older homes need extra parts for a new appliance connection?
Often they do, because interwar and 1950s brick homes here sometimes lack reachable isolation valves or graded standpipes, and the quote includes whatever hoses, valves or drainage work brings the connection up to modern standard.
What does an appliance installation cost?
Every job is quoted as a fixed written price after the inspection, with a $0 call out, so the figure you approve before any tool comes off the van is what appears on the invoice.
A new appliance waiting in Riverview? Call now and get it connected
Call (02) 9072 0504 now and speak straight to a licensed plumber, day or night. The call out fee is $0, the price goes on paper before a tool comes off the van, and every repair is backed by our Lifetime Labour Warranty.
The full range of what we do, from drains to hot water, sits on the home page.